Centurion D5-EVO REPAIR 설치 지침 매뉴얼 - 페이지 2
{카테고리_이름} Centurion D5-EVO REPAIR에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Centurion D5-EVO REPAIR 14 페이지. Sliding gate operator
Centurion D5-EVO REPAIR에 대해서도 마찬가지입니다: 구성 매뉴얼 (13 페이지), 프로그래밍 매뉴얼 (4 페이지)
페이지 인쇄
This guide is designed specifically for installers who are familiar with
the installation of standard sliding gate motors, but do not know the
specifics of the D5-Evo
Please do not proceed with the installation until you have
read and fully understand the Safety Instructions
included in your product packaging
The Safety Instructions are also available on
www.centsys.co.za, and may also be obtained by
contacting Centurion Systems on +27 860 236 887
(RSA only)
This icon indicates tips and other information that could be useful
during the installation
This icon denotes variations and other aspects that should be
considered during installation
This icon indicates warning, caution or attention!
Please take special note of critical aspects that MUST be
adhered to in order to prevent injury
The D5-Evo is a domestic and light-industrial operator designed to
open and close sliding gates weighing up to 500kg. A custom
designed gearbox moulded from robust engineering polymers, coupled
to a powerful 12V DC motor, provides fast and reliable automation for
entrances to homes and small housing estates.
It is a 12V DC battery operated unit with the following limitations:
Operator push force - starting:
Operator push force - rated:
Gate mass – maximum:
Gate length – maximum:
Maximum numbers of operations per day:
30kgf
17kgf
500kg
100m
150