Major tech MT957 사용 설명서 - 페이지 9

{카테고리_이름} Major tech MT957에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT957 17 페이지. Lcr meter

AUTO RANGING/MANUAL RANGE SELECTION

When the meter is first turned on, it automatically goes into Auto

ranging. This automatically selects the best range for the measurements

being made and is generally the best mode for most measurements. For

measurement situations requiring that a range be manually selected,

perform the following:

Press the RANGE key. The "AUTO" display indicator will turn off or

select diode /beeper, AC/DC Clamp

Press the RANGE key to step through the available ranges until you

select the range you want.

To exit the Manual Ranging mode and return to Auto ranging, press

and hold the RANGE key for 2 seconds.

MAX/MIN

Note: When using the MAX/MIN function in Autoranging mode, the

meter will "lock" into the range that is displayed on the LCD when

MAX/MIN is activated. If a MAX/MIN reading exceeds that range, an

"OL" will be displayed. Select the desired range BEFORE entering

MAX/MIN mode.

Press the MAX/MIN key to activate the MAX/MIN recording

mode. The display icon "MAX" will appear. The meter will display

and hold the maximum reading and will update only when a new

"MAX" occurs.

Press the MAX/MIN key again and the display icon "MIN" will

appear. The meter will display and hold the minimum reading and

will update only when a new "MIN" occurs.

To exit MAX/MIN mode press and hold the MAX/MIN key for 2

seconds