IKEA GORLIG 매뉴얼 - 페이지 13

{카테고리_이름} IKEA GORLIG에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA GORLIG 40 페이지. Built-in oven
IKEA GORLIG에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지), 사용자 설명서 (24 페이지), 사용자 설명서 (20 페이지), 사용자 설명서 (32 페이지), 매뉴얼 (24 페이지), 지침 (16 페이지), 설치 지침 매뉴얼 (28 페이지), 매뉴얼 (28 페이지), 사용자 설명서 (24 페이지), 매뉴얼 (48 페이지), 매뉴얼 (24 페이지)

페이지 인쇄
IKEA GORLIG 매뉴얼
ENGLISH
5
Release the locking
system to remove
the internal glass
panel.
7
2
1
First lift carefully
and then remove
the glass panel.
Clean the glass panel with water and soap.
Dry the glass panel carefully.
When the cleaning is completed, install the
glass panel and the oven door. Do the
above steps in the opposite sequence.
The screen-printing zone must face the
inner side of the door. Make sure that after
the installation the surface of the glass
panel frame on the screen-printing zones is
not rough when you touch it.
Make sure that you install the internal glass
panel in the seats correctly.

Troubleshooting

Warning! Refer to Safety
chapters.
6
90°
Turn the two
fasteners by 90°
and remove them
from their seats.
Replacing the lamp
Put a cloth on the bottom of the interior of
the appliance. It prevents damage to the
lamp glass cover and the cavity.
Warning! Danger of
electrocution! Disconnect the fuse
before you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
deactivate the circuit breaker.
3. Turn the lamp glass cover
counterclockwise to remove it.
4. Clean the glass cover.
5. Replace the oven light bulb with a 25
W, 230 V (50 Hz), 300 °C heat resistant
oven light bulb (connection type: E14).
6. Install the glass cover.
13