Airflow iCON eco15 설치 및 운영 매뉴얼 - 페이지 6
{카테고리_이름} Airflow iCON eco15에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Airflow iCON eco15 9 페이지. Domestic ac fans – 230v
페이지 인쇄
- 1. Installation/Maintenance/Use
- 2. Front Cover Removal
- 3. Mechanical Installation
- 4. Recessing Fans in the Wall
- 5. Surface Mounting Fans on Wall
- 6. Recessing Fans in Ceiling
- 7. Surface Mounting Fans on Ceiling
- 8. Electrical Installation
- 9. Optional Modules for Icon/Eco 230V
- 10. Troubleshooting Tip
- 11. Maintenance
- 12. Warranty
- 13. Range of Optional Modules
Electrical Installation
All electrical installation to be carried out by an approved electrician in accordance with Part
"P" U.K. Building Regulations and to the latest IEEE standards, or the appropriate regulations
in the country of installation.
iCON Domestic Fans require a 230V 50Hz supply, it is double insulated so therefore does not
require an earth.
For fans mounted in Zones 1 & 2 as defined in section 701 BS7161:2008 Additional
protection must be provided by a Residual current device (RCD) with a rated residual
operating current not exceeding 30mA .
Wiring with no control module fitted.
N
N
RCD
L
L
SWITCHED FUSE
Optional Modules for iCON and iCON eco 230V
Wiring for control modules with external switching
A
N
RCD
L
3 AMP
SWITCHED FUSE
Wiring for control modules with no external switching
B
N
RCD
L
Refer to instructions supplied with (optional) modules for further information.
3 AMP
N
L
LS
3 AMP
SWITCHED FUSE
Page 6 of 8