IKEA GRANSLOS 사용자 설명서 - 페이지 8

{카테고리_이름} IKEA GRANSLOS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA GRANSLOS 48 페이지. Built-in oven
IKEA GRANSLOS에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지), 설치 및 사용자 설명서 (32 페이지), 소유자 매뉴얼 (28 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 (32 페이지), 사용자 설명서 (32 페이지), 매뉴얼 (32 페이지), 매뉴얼 (24 페이지), 매뉴얼 (32 페이지), 설치 지침 매뉴얼 (32 페이지)

IKEA GRANSLOS 사용자 설명서
ENGLISH

Product description

1
14
5
4
13
3
2
1
12
11
10
Oven function control knob
1
Electronic programmer
2
Temperature control knob
3
Water drawer
4
Grill
5
Socket for the core temperature sensor
6

Before first use

Warning! Refer to the Safety chapters.
Initial cleaning
• Remove all accessories and removable
shelf supports.
• Clean the appliance before first use.
Important! Refer to the chapter "Care and
cleaning".
Setting the time of day
The display shows
es.
1. Press + or - to set the correct hour.
2. Press
to confirm. This is necessary
only when you first set the time. After-
wards, the new time value is saved au-
tomatically after five seconds.
The display shows
hour. 00 flashes.
3. Press + or - to set the correct minutes.
2 3
4
5
6
7
8
9
and 12:00. 12 flash-
and the set
Oven lamp
7
Fan
8
Shelf support, removable
9
Draining pipe
10
Water outlet valve
11
Rating plate
12
Shelf positions
13
Steam inlet
14
Oven accessories
• Wire shelf x 2
For cookware, cake tins, roasts.
• Baking tray x 1
For cakes and biscuits.
• Grill- / Roasting pan x 1
To bake and roast or as pan to collect
fat.
• Core temperature sensor x 1
To measure how far the food is cooked.
• Telescopic runners x 2 sets
For shelves and trays.
4. Press
to confirm. This is necessary
only when you first set the time. After-
wards, the new time value is saved au-
tomatically after five seconds.
The display shows the new time.
Changing the time of day
You can change the time of day only
when the appliance is in standby
mode.
Press
again and again until the indicator
for the time of day
To set the new time, follow the procedure
given in "Setting the time of day".
Preheating
Preheat the empty appliance to burn off the
remaining grease.
1. Set the function
temperature.
flashes in the display.
and the maximum
8