ENGLISH
Accessories
• Wire shelf x 1
For cookware, cake tins, roasts.
• Baking tray x 1
Before first use
Warning! Refer to Safety
chapters.
Initial Cleaning
Remove all accessories and removable shelf
supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance and the accessories
before first use.
Put the accessories and the removable shelf
supports back to their initial position.
Setting the time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few seconds
the display shows the software version.
After the software version goes off, the
display shows
and "12:00". "12"
flashes.
1. Turn the knob for the temperature /
microwave power right or left to set the
current hour.
2. Press
to confirm. This is necessary
only when you set the time for the first
time. Later the new time will be saved
automatically after 5 seconds.
The display shows
"00" flashes.
3. Turn the knob for the temperature /
microwave power right or left to set the
current minutes
and the set hour.
For cakes and biscuits.
• Microwave bottom glass plate x 1
To support microwave mode.
4. Press
to confirm. This is necessary
only when you set the time for the first
time. Later the new time will be saved
automatically after 5 seconds.
The display shows the new time.
Changing the time
You can change the time of day only when
the oven is in standby mode.
Press
again and again until the symbol
flashes in the display.
To set a new time, refer to "Setting the
time".
Preheating
Before first use preheat the appliance with
only wire shelves and baking trays inside.
The microwave bottom glass plate must be
removed.
1. Set the function
temperature.
2. Let the appliance operate for 1 hour.
3. Set the function
temperature.
4. Let the appliance operate for 15
minutes.
5. Set the function
temperature.
Accessories can become hotter than usual.
The appliance can emit an odour and
smoke. This is normal. Make sure that the
airflow in the room is sufficient.
10
and the maximum
and set the maximum
and set the maximum
페이지 인쇄