KitchenAid KECC051HWH3 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} KitchenAid KECC051HWH3에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KECC051HWH3 15 페이지. Electric built-in ceramic cooktops 15" (38.1 cm), 30" (76.2 cm) and 36" (91.4 cm)
KitchenAid KECC051HWH3에 대해서도 마찬가지입니다: 부품 목록 (3 페이지)

페이지 인쇄

2. Connect the flexible, armored cable

from the cooktop to the junction box

using a U.L.- or CSA-listed conduit

connector. Tighten screws on conduit

connector.

3. Connect the two black wires

together; then connect the two red

wires together using twist-on

connector. (See Figure 1.)

4. Connect the green or bare ground

wire from the cooktop cable to the

grounded wire in the junction box or

other grounded connector using

twist-on connector.

5. Put a twist-on connector on end of

white wire. Do Not connect bare

ground wire to neutral (white) wire

in junction box.

Where local codes permit

connecting the frame-ground

conductor to the neutral (white)

junction box wire. (Not used for

Canadian installations):

3-wire cable from power supply

red wires

white wire

bare or

green wire

U.L.- or CSA- listed

3-wire cable

conduit connector

from cooktop

Grounded neutral

Figure 2

1. Follow steps 1 and 2 from "A" above.

2. Connect the bare cooktop wire with

the white wire; the two red wires

together; and the two black wires

together using twist-on connectors.

(See Figure 2.)

For all cooktop models with

four-wire cable from the cooktop.

(These cooktops are

manufactured with white

[neutral] power supply wire and

a cabinet-connected bare ground

wire factory-crimped together.):

Where local codes Do Not

permit connecting the frame-ground

conductor to the neutral (white)

junction box wire: (Used for

Canadian installations):

4-wire cable from power supply

red wires

bare or green

wires

4-wire cable from cooktop

junction box

twist-on

Ungrounded neutral

connectors

1. Disconnect power supply.

2. Connect the flexible, armored cable

black wires

from the cooktop to the junction box

using a U.L.- or C.S.A.-listed conduit

connector. Tighten screws on conduit

connector.

3. Connect the two black wires

together; then connect the two red

wires together using twist-on

connectors. (See Figure 3.)

4. Separate the factory-crimped bare

and white cooktop cable wires.

5. Connect the two white wires together

using twist-on connectors.

6. Connect the bare ground wire from

the cooktop cable to the grounded

wire in the junction box or other

grounded connector using twist-on

connector. (See Figure 3.)

Do Not connect bare ground wire

to neutral (white) wire in junction

box.

junction box

white wires

twist-on

connector

black wires

U.L.- or CSA- listed

conduit connector

Figure 3

Where local codes permit

connecting the frame-ground

conductor to the neutral (white)

junction box wire. (Not used for

Canadian installations):

3-wire cable from

power supply

junction

box

red

wires

white

wire

white and bare

grounding oven cable

wires — factory

crimped

4-wire cable from cooktop

Grounded neutral

Figure 4

1. Follow steps 1 and 2 from "A" above.

2. Connect the two black wires

together; the two red wires together;

and the factory-crimped bare and

white cooktop cable wires to the

white (neutral) wire in the junction

box using twist-on connectors. (See

Figure 4.)

Where local codes Do Not

permit connecting the frame-ground

conductor to the neutral (white)

junction box wire:

1. Follow steps 1 and 2 from "A" above.

2. Connect the two black wires together

and the two red wires together.

3. Separate the factory-crimped bare

and white cooktop cable wires.

4. Connect the two white wires together

using twist-on connectors.

5. Connect the bare ground wire from

the cooktop cable to a grounded wire

in the junction box or other grounded

connector using twist-on connector.

(See Figure 3.)

Do Not connect bare ground wire

to neutral (white) wire in junction

box.

black

wires

U.L.- or CSA-

listed conduit

connector