Major tech MT570 사용 설명서 - 페이지 10

{카테고리_이름} Major tech MT570에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT570 16 페이지. 5kv high voltage insulation tester

7.1.2. Insulation measuring procedure:

1. Connect to test cable to test object.

2. Turn the function rotary switch to the test voltage from

3. When pressing and holding the backlight button then the

4. Be sure that the cable connecting the test object does not

If pressing the TEST/ STOP button, the LCD displays the

warning picture show in below

Note: The test cannot be performed. To test remove the

exterior voltage.

5. Press the TEST / STOP button for testing continuously.

6. Press the TEST / STOP button for discharging.

7. Read the test value from LCD display.

10 10

500V, 1000V, 2500V or 5000V respectively.

display will shows the backlight function.

have a voltage (above AC30V or DC30V). The LCD will

display the voltage picture as show in the AC/ DC voltage.

While test is running, beeper activates to remind -9-

operator that test is underway. After the set test time is

completed (see Function 2: the test time setting), the test

stops and system will automatically hold the test value. To

read the test value on the LCD display.