jali Cupboard - Multi 조립 지침 매뉴얼 - 페이지 3

{카테고리_이름} jali Cupboard - Multi에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. jali Cupboard - Multi 10 페이지.
jali Cupboard - Multi에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (11 페이지)

페이지 인쇄

PLACE FIXINGS

2. We'll start with the left hand (LH) and right hand (RH) Sides. Place the Nickel Cams in all the

available holes, facing outwards. Using the screwdriver, or a power tool on a low setting, screw the

Cam Bolts into the available 5mm holes on the LH & RH Sides. Unlike the 6mm holes, these 5mm

holes do not go all the way through.

Fit a Cam Bolt into each

hole on the top side

3. If your design features any Dividers, look for 5mm 'through' holes. Each hole requires a Cam Bolt

on each side. Screw in all Cam Bolts required on one side of the Divider, then turn the Divider over,

and screw in Cam Bolts, in the same holes, on the opposite side.

Assembly Instructions: Single Section Cupboard

LH Side

Divider

Fit a second Cam Bolt into the

same holes on the underside

Page 3 of 10