Major tech MT403 사용 설명서 - 페이지 4

{카테고리_이름} Major tech MT403에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT403 8 페이지. Non-contact ac voltage detector

4. General Specifications

Detection Voltage Range

Frequency Range

Batteries

Operating Temperature

Storage Temperature

Humidity

Altitude

Pollution Degree

Safety Compliance

5. Operation

Turning the Tester On:

Press the tester On/Off button. The beeper will beep once and the green

LED will illuminate to indicate that the tester is on and ready for use.

Turning the Tester Off:

Press the On/Off button. The tester will beep twice and the green LED will

turn off.

Turning the Beeper Off:

With the tester off, press and hold the On/Off button until the green LED

is illuminated. The tester will now operate without the beeper. To turn the

beeper off when the tester is on, press and hold the button until the

green LED flashes. To turn the beeper back on, press and hold the button

until the green LED flashes and beeper beeps.

Verify Operation:

Before using tester, (1) Make sure the green LED is glowing, (2) Check

tester on a known live AC voltage that is within the defined detection

range of the tester.

High Voltage Mode (100 to 1000V AC):

Place the tip of the tester near an AC voltage. If the tester detects voltage

within the defined detection range, the green LED will turn off, the red

LED will turn on, and the beeper will beep rapidly.

100V AC to 1000V AC, 12V to 1000V AC

50/60Hz

2 x AAA

0°C to 50°C (32°F to 122°F)

-10°C to 60°C (-14°F to 140°F)

80% max

2000 meters

CAT IV 1000V