Major tech MT915 사용 설명서 - 페이지 6
{카테고리_이름} Major tech MT915에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT915 12 페이지. 2-in-1 cable identifier & digital multimeter
Major tech MT915에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지)
페이지 인쇄
3.2. TRANSMITTER
Function
Display
Aligators
Cable resistance
Power
Power current
Operating temperature 0°C to 40°C (32°F to 104°F)
Storage temperature
3.2. RECEIVER
Function
Display
Aligators
Power
Power current
Operating temperature 0°C to 40°C (32°F to 104°F)
Storage temperature
Continuity test
Cable voltage check
4. MEASURING PROCEDURE
4.1. Transmitter & Receiver Operation
1. At one end of the cable, connect one of the transmitter terminals
marked "CH1 to CH16" to each core of the cable under tester. Connect
the "COM"reference lead (black alligator) of the transmitter to a core
which is the only known one.
2. At the other end of the cable, connect the "COM terminal"(black
alligator) of the receiver. When the "input terminal" (red alligator) of
the receiver is successively touched on the cores of the cable under
test, the relevant number of the way is indicated on the display of the
receiver (1-16).
Operation example 1: Cable trace test
Operation example 2: Metal water pipe trace test
CAUTION: Though the units already build in the protection
circuit, do not apply voltage that is over 50V (AC or DCV) to
any alligator clips of the transmitter & receiver. Otherwise
the instruments may be permanently damaged.
6
Range
Two red LED lamps
17 Croc clips-red*16,black*1
30K Ohm max
9V battery
1.8mA
–10°C to 50°C (14°F to 122°F)
Range
Two digit blue LED display
2 Croc clips-red*1,black*1
9V battery
23mA
–10°C to 50°C (14°F to 122°F)
Beep if less than 100Ω
5V to 16V DC