IKEA KULINARISK 사용자 설명서 - 페이지 16

{카테고리_이름} IKEA KULINARISK에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA KULINARISK 36 페이지. Oven with steam feature
IKEA KULINARISK에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지), 사용자 설명서 (36 페이지), 사용자 설명서 (16 페이지), 사용자 설명서 (32 페이지), 매뉴얼 (36 페이지), 사용 설명서 (48 페이지), 사용 설명서 (36 페이지), 매뉴얼 (24 페이지), 설치 지침 매뉴얼 (36 페이지), 매뉴얼 (20 페이지), 매뉴얼 (44 페이지), 사용자 설명서 (36 페이지), 매뉴얼 (40 페이지), 매뉴얼 (40 페이지), 사용자 설명서 (20 페이지), 매뉴얼 (37 페이지), 매뉴얼 (32 페이지), 빠른 시작 매뉴얼 (16 페이지), 매뉴얼 (20 페이지), 매뉴얼 (20 페이지), 매뉴얼 (36 페이지), 매뉴얼 (21 페이지), 빠른 시작 매뉴얼 (8 페이지), 매뉴얼 (40 페이지), 매뉴얼 (20 페이지), 매뉴얼 (32 페이지), 매뉴얼 (36 페이지), 매뉴얼 (17 페이지)

페이지 인쇄
IKEA KULINARISK 사용자 설명서
ENGLISH
There is no indication that the
water drawer is full, apart
from the bottom steam
generator.
4. Push the water drawer to its initial
position.
5. Activate the appliance.
6. Select a steam heating function and the
temperature.
7. If necessary, set the function Duration
or End Time
When the steam generator is
empty, an acoustic signal sounds.
The signal sounds at the end of the cooking
time.
8. Deactivate the appliance.
9. Empty the water drawer after the steam
cooking is completed.
Caution! The appliance is
hot. There is a risk of burns.
Be careful when you empty
the water drawer.
Let the appliance dry fully with the door
open.
Warning! Wait a minimum of 60
minutes after each use of the
steam cooking in order to
prevent hot water from exiting
the water outlet valve.
Tank Empty indicator
The display shows: Water required and an
acoustic signal sounds when the tank is
empty and must be refilled.
For more information refer to "Steam
Cooking".
Tank Full indicator
When the display shows: Water tank full,
you can use the steam cooking.
An acoustic signal sounds when the tank is
full.
.
If you put too much water into
the tank, the safety outlet moves
the excess water to the bottom of
the oven.
Remove the water with a sponge
or cloth.
Emptying the water tank
Caution! Make sure that the
appliance is cool before you start
to empty the water tank.
1. Prepare the draining pipe (C), included
in the same package with the user
manual. Put the connector (B) onto one
of the ends of the draining pipe.
A
B
C
2. Put the second end of the draining pipe
(C) into a container. Put it at a lower
position than the outlet valve (A).
3. Open the oven door and put the
connector (B) into the outlet valve (A).
4. Push the connector again and again
when you empty the water tank.
The tank can have some
water when the display
shows: Water required.
Wait until the water flow from
the water outlet valve stops.
5. Remove the connector from the valve
when the water stops flowing.
Do not use the drained water to
fill the water tank again.
16