Major tech MTD8 프로그래밍 지침

{카테고리_이름} Major tech MTD8에 대한 프로그래밍 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MTD8 2 페이지. Digital programmable timer
Major tech MTD8에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

INSTRUCTIONS TO PROGRAM THE MTD8 DIGITAL INDUSTRIAL TIMER

Programming the MTD8 Digital Industrial Programable Timer

The first step is to set your Clock, the timer will not work correctly if your Clock is not set to the present

time.

SETTING THE CLOCK

•

HOLD DOWN THE C+ BUTTON (CLOCK)

•

WHILE HOLDING DOWN THE C+ BUTTON - PRESS THE W+ (WEEK) BUTTON UNTIL YOU HAVE

THE ACTUAL DAY SHOWING (MON, TUE, WED, ETC)

•

STILL HOLDING DOWN THE C+ BUTTON - PRESS H+ (HOUR) BUTTON UNTIL YOU SEE THE

ACTUAL HOUR THAT IS YOUR TIME.

•

STILL HOLDING DOWN THE C+ BUTTON - PRESS M+ (MINUTE) UNTIL YOU GET YOUR ACTUAL

MINUTES.

•

RELEASE C+ BUTTON (CLOCK)

•

YOUR CLOCK/TIME IS SET

SETTING YOUR TIMER

•

PRESS THE TIMER Ꚛ BUTTON ONCE AND RELEASE (DO NOT HOLD DOWN)

•

ON THE SCREEN YOU SHOULD SEE 1 ON, (THIS IS TO SET THE FIRST TIME YOU WOULD LIKE THE

TIMER TO COME ON).

•

THEN PRESS THE W+ (WEEK) UNTIL YOU SEE THE DAY YOU WOULD LIKE YOUR TIMER TO COME

ON. YOU HAVE THE FOLLOWING COMBINATIONS:

Mo, Tu, We, Th, Fr, Sa, Su – individually OR

Mo,Tu,We,Th,Fr,Sa,Su

Mo,Tu,We,Th,Fr,

Sa,Su

Mo,Tu,We,Th,Fr,Sa

Mo,Tu,We

Th,Fr,Sa

•

Select the day or days you would like your timer to come on (as above)

•

Then Press the H+ (Hour) until you have the hour you would like your timer to switch on.

•

Then Press the M+ (Minute) until you have the minutes you would like your timer to come on.

•

That is your timer set to switch your timer ON.

•

To set your timer to go off press TIMER Ꚛ BUTTON once and you will see on the screen, 1 OFF

•

Then select the day or days with the W+ (week) button that you want your timer to switch off.

•

Then select the H+ (hour) button to the hour you would like your timer to switch off.