IKEA KULINARISK 매뉴얼 - 페이지 17

{카테고리_이름} IKEA KULINARISK에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA KULINARISK 40 페이지. Oven with steam feature
IKEA KULINARISK에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지), 사용자 설명서 (36 페이지), 사용자 설명서 (16 페이지), 사용자 설명서 (36 페이지), 사용자 설명서 (32 페이지), 매뉴얼 (36 페이지), 사용 설명서 (48 페이지), 사용 설명서 (36 페이지), 매뉴얼 (24 페이지), 설치 지침 매뉴얼 (36 페이지), 매뉴얼 (20 페이지), 매뉴얼 (44 페이지), 사용자 설명서 (36 페이지), 매뉴얼 (40 페이지), 매뉴얼 (40 페이지), 사용자 설명서 (20 페이지), 매뉴얼 (37 페이지), 매뉴얼 (32 페이지), 빠른 시작 매뉴얼 (16 페이지), 매뉴얼 (20 페이지), 매뉴얼 (20 페이지), 매뉴얼 (36 페이지), 매뉴얼 (21 페이지), 빠른 시작 매뉴얼 (8 페이지), 매뉴얼 (20 페이지), 매뉴얼 (32 페이지), 매뉴얼 (36 페이지), 매뉴얼 (17 페이지)

페이지 인쇄
IKEA KULINARISK 매뉴얼
ENGLISH
Heat-up indicator
When you turn on a heating function, the
bar on the display comes on. The bar shows
that the temperature increases. When
temperature is reached the buzzer sounds 3
times and the bar flashes and then
disappears.
Fast Heat Up
This function decreases the heat-up time.
Do not put food in the oven when
the Fast heat up function works.

Clock functions

Clock functions table
Clock function
Minute Mind‐
er
Duration
End Time
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions:
Duration, End Time, the oven
turns off the heating elements
after 90 % of the set time. The
oven uses the residual heat to
continue the cooking process
until the time ends (3 - 20
minutes).
Application
To set a countdown
(max. 2 h 30 min). This
function has no effect
on the operation of the
oven.
Use
to turn on the
function. Press
or
set the minutes and
to start.
To set how long the
oven works (max. 23 h
59 min).
To set the switch-off
time for a heating func‐
tion (max. 23 h 59 min).
To turn on the function, hold
seconds. The heat-up indicator alternates.
This function is not available for some oven
functions.
Residual heat
When you turn off the oven, the display
shows the residual heat. You can use the
heat to keep the food warm.
Setting the clock functions
Before you use the functions:
Duration, End Time, you must set
a heating function and
temperature first. The oven turns
off automatically.
You can use the functions:
Duration and End Time at the
same time if you want to
automatically turn on and turn off
to
the oven on a given time later.
The functions: Duration and End
Time do not work when you use
the core temperature sensor.
1. Set a heating function.
2. Press
display shows the necessary clock
function and the related symbol.
3. Press
4. Press
When the time ends, a signal sounds. The
oven turns off. The display shows a
message.
5. Press any symbol to stop the signal.
Heat + Hold
Conditions for the function:
• The set temperature is more than 80 °C.
• The function: Duration is set.
again and again until the
or
to set the necessary time.
to confirm.
17
for 3