KitchenAid KECC506RSS03 설치 지침 매뉴얼 - 페이지 3
{카테고리_이름} KitchenAid KECC506RSS03에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KECC506RSS03 16 페이지. Electric cooktop
KitchenAid KECC506RSS03에 대해서도 마찬가지입니다: 부품 목록 (3 페이지)
페이지 인쇄
Installation Clearances
For model 15" (38.1 cm) model only:
back edge
rear of cabinet
or
of cutout
rear wall under
countertop
\
\
B
A. W16"(1.7cm) min.
B. 1F2" (3.8 cm) max.
For 15" (38.1 cm) model only:
A. 15" (38.1 cm) on 15" (38.1 cm) models; 30" (76.2 cm) on
30" (76.2 cm) models; 36" (91.4 cm) on 36" (91.4 cm) models
B. Combustible
area above countertop
(shown by dashed box above)
C. 30" (76.2 cm) minimum clearance between top of cooktop platform
and bottom of unprotected
wood or metal cabinet (24" [61 cm]
minimum clearance ff bottom of wood or metal cabinet is protected
by not less than V4"[0.6 cm] flame retardant millboard covered with
not less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless
steel, or 0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper)
D. 13" (33 cm) recommended
upper cabinet depth
E. 2"(5.1 cm)
F. 20_2" (52 cm)
G. 18" (45.7 cm) minimum clearance from upper cabinet to coun tertop
within minimum horizontal clearances to cooktop
H. Junction box or outlet," 12" (30.5 cm) minimum from bottom of
countertop;
10" (25.4 cm) from right side of cabinet
I. 14_2" (36.8 cm) on 15" (38.1 cm) models; 29_/p '' (74.9 cm) on
30" (76.2 cm) models; 35_2" (90.2 cm) on 36" (91.4 cm) models
J. 1" (2.5 cm) minimum distance to nearest left and right side
combustible
surface above cooktop
K. 1_2" (3.8 cm) max. counter thickness on 15" (38.1 cm) models. See
following illustration.
L. 1" (2.5 cm) minimum clearance between back wall and countertop
NOTES: After making the countertop cutout, some installations
may require notching down the base cabinet side walls to clear
the burner box. To avoid this modification,
use a base cabinet with
sidewalls wider than the cutout.
If cabinet has a drawer, a 3" (7.6 cm) depth clearance from the
countertop to the top of the drawer (or other obstruction) in base
cabinet is required.
When installing a hood above this cooktop, follow the installation
instructions included with the hood itself.
Electrical
Shock
Hazard
Disconnect
power
before
servicing.
Use 12 gauge
copper
wire.
Electrically
ground
cooktop.
Failure
to follow
these
instructions
can result
in death,
fire, or electrical
shock.
For all models except 15" (38.1 cm) model:
Electrical
Shock
Hazard
Disconnect
power
before
servicing.
Use 8 gauge
copper
wire.
Electrically
ground
cooktop.
Failure
to follow
these
instructions
can result
in death,
fire, or electrical
shock.
If codes
permit
and a separate
ground
wire is used, it is
recommended
that a qualified
electrical
installer
determine
that
the ground
path and wire gauge
are in accordance
with
local
codes.