IKEA Nutid Series 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} IKEA Nutid Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA Nutid Series 24 페이지. 24" (61.0 cm) or 30" (76.2 cm) built-in microwave oven
IKEA Nutid Series에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (48 페이지)

페이지 인쇄

2. Using a drill with 5/64" (2 mm) bit, drill pilot holes through the

2 holes in the tiered edge.

3. Secure the bracket to the opening side rim with two

1/2" (1.27 cm) T10 screws.

A. Tiered edge

B. T10 screws

4. Repeat on other side.

To Install Microwave Oven:

WARNING

Excessive Weight Hazard

Use two or more people to move and install

microwave oven.

Failure to do so can result in back or other injury.

NOTE: For this microwave oven, the door handle may be used

for lifting. Do not use any other portion of the control panel, side

brackets, front frame, or trim for lifting.

1. Empty microwave oven of any loose items.

2. From behind the console, remove the 2 screws that secure

the top complement piece to the console. The top

complement piece will not be used in this installation.

A. Back of console

B. Top complement piece

3. Reinstall the 2 screws, securing the console to the

microwave oven.

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

4. With the microwave oven near the opening, plug the

microwave oven into the grounded 3 prong outlet.

5. Using 2 or more people, slide the microwave oven all the

way into the opening.

6. Open the microwave oven door. The holes in the door facing

frame should align with the holes in the mounting brackets.

Secure the microwave oven door facing to the mounting

brackets using four 1" (2.54 cm) T10 screws.

7. Proceed to the "Complete Installation" section.

WARNING

Electrical Shock Hazard

A. Microwave oven door

facing frame

B. Cabinet

C. 1" (2.54 cm) T10 screws (4)