2KRC P001 조립 설명서 - 페이지 10

{카테고리_이름} 2KRC P001에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 2KRC P001 17 페이지. Hyper ep. fun scale racer

please check that on place that spinner open hole for

prop. Will not hit the prop in any place. If there any

place has a hit. Please trim the spinner hole before you

install the spinner and use.

IMPORTANT NOTICE: IF THE SPINNER HIT THE

PROP. WHEN PROP. WAS RUNING SUCH HIGH

SPEED WAS VERY DANGEROUS. WILL CAUSE

SOME ONE GET KILL...!!!!!

Fix the spinner and prop. When you fix the prop.

Please check the spinner edge should be having a bit

space with the Fuse. That should be around 0.5mm.

Install power plug as show if you use same as the

sample.

Connecting motor and ESC. plug together also

connecting signal lead to receiver throttle CH. then

connection the battery to ESC.

the battery to receiver must turn on the Radio and put

throttle stick all way low as well as the trim)

Then check the direction of prop. turn, if prop turn

wrong direction you can set your ESC or just reverse

any two motor wire with ESC. to fix it.

(before you connecting