2KRC P001 조립 설명서 - 페이지 5

{카테고리_이름} 2KRC P001에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 2KRC P001 17 페이지. Hyper ep. fun scale racer

Install the servo horn and on the Elevator then turn on

the Radio to neutral the Elevator Servo.

Drill a 1.9mm hole for the control wire adjuster 8mm

from the center of the servo horn as show.

Install the control wire adjuster and mount the

Elevator Servo on the servo tray as show.

Notice: you must neutral the servo before them install

inside the Fuse.

Turn the servo tray around 90degree and push them

install the fuse. Then turn them right side up again.

Fix the servo tray with a TP screw that supply with

this kit.