Green Energy LAR200 사용자 설명서 - 페이지 7

{카테고리_이름} Green Energy LAR200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Energy LAR200 16 페이지. Lifepo4 battery

LAR200（12.8V 200Ah LiFePO4 battery）User manual

**Note: the battery MUST get a fully charge and discharge cycle then you can get an accurate battery capacity**

2. Check before use

When the customer receives the battery, first check whether the battery is damaged, cracked,

or corroded; connect to Bluetooth, check whether the battery is in normal condition on the

mobile phone APP., and ensure that there is no damage during transportation. If there is any

abnormality, please stop installation and use immediately then notify us.

3. Installation

Before installation, make sure that the cables and terminals are kept clean to avoid any

corrosion, dirt or deposits.

Please confirm whether the battery voltage matches the battery charger and load before

installation.

Select wires, cables and terminals with appropriate specifications and sizes that meet the

standard, and ensure that the positive and negative connections are correct; tighten the

wires, cables and terminals to ensure that they are firmly fixed to reduce the resistance

between the DC terminal and the cable connection.

If the batteries need to be used in series or parallel, please fully charge the batteries before

installation. The maximum number of batteries in series is 4 groups, and the number of

batteries in parallel is recommended to be no more than 10 groups. The allowable number in

series and parallel is as follows:

When there is a necessary to connect the battery in series or parallel, please

Fully Charge

the batteries before installation. The maximum number of batteries in series is 4 groups, and