Deco Lighting DWH-LED 설치 지침
{카테고리_이름} Deco Lighting DWH-LED에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Deco Lighting DWH-LED 4 페이지. Industrial/vapor tight led
페이지 인쇄INSTALLATION INSTRUCTIONS
1. Read carefully before installing fixture. Retain for future reference.
2. Failure to follow instructions may result in serious injury or death.
3. Upon receipt the fixture, thoroughly inspect for any freight damage which should be brought to the attention of
the delivery carrier. Compare the catalog description listed on the package slip with the fixture label on the housing to
assure you have received material.
4. This fixture must be wired in accordance with the international electrical code and applicable local codes and
ordinances. Proper grounding is required to insure personal safety. Carefully observe the correct grounding procedure
under installation section.
5. DECO luminaires may be damaged if connected to conduit systems containing water - Article 300-5G of National
Electric Code requires that "Conduits or raceways through which moisture may contact energized live parts shall be
sealed or plugged at either or both ends".
*Deco Lighting assumes no responsibility for claims arising out of improper or careless handling or installation of this product.
General Wiring Diagram
Electrical Connection
1. Connect BLACK (line) driver lead to voltage supply Line position
(HOT).
2. Connect driver WHITE lead to the NEUTRAL supply position.
3. Connect the GREEN ground lead to the supply ground lead.
If using 0-10V dimming:
4. Connect VIOLET lead to supply POSITIVE dimming lead.
5. Connect GREY lead to the supply NEGATIVE dimming lead.
If NOT using 0-10V dimming:
6. Ensure VIOLET and GREY 0-10V dimming leads are properly
capped.
Deco Lighting practices a program of continuous product improvement, and as a result product specifications change frequently. We reserve the right to change
product specifications without notice. Contact Deco for the latest product information.
2917 Vail Ave.Commerce, CA 90040
Industrial/Vapor Tight LED
IMPORTANT SAFETY INSTRUCTIONS
To prevent electrical shock, turn off electricity at fuse box before proceeding.
800-613-3326
•
•
DWH-LED
www.getdeco.com
•
1