MAJORITY Sierra 매뉴얼 - 페이지 5
{카테고리_이름} MAJORITY Sierra에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. MAJORITY Sierra 10 페이지.
Connect the HDMI cable from the HDMI output on the soundbar (Back View Ref.9) to the HDMI input on your
TV (for help on how to locate your TV'S HDMI ARC input, refer to your TV's user manual).
Press the 'INPUT' button on the remote control (Remote Control Ref.10) or the 'SOURCE/MODE' button on the
top of the soundbar (Front and Top View Ref.5) until 'ARC' mode is selected. The display will show 'ARC'
(Front and Top View Ref.1).
Using the native controls on your connected device, ensure the audio settings are set to ARC or HDMI Audio.
Using the AUX/Line In Port
You will need an AUX source with an AUX audio output an AUX audio cable (not included).
Plug one end of a 3.5mm audio input cable into the LINE port on the side of the soundbar (Back View Ref.10).
Plug the other end of the cable into the audio output/headphone output on your MP3 player or audio device.
Press the 'INPUT' button on the remote control (Remote Control Ref.10) or the 'SOURCE/MODE' button on the
top of the soundbar (Front and Top View Ref.5) to switch to 'AUX' mode. The Display will show' AUX' (Front
and Top View Ref.1).
Using the Optical Input
You will need an audio source with an optical audio output and a digital optical audio cable (not
included).
Connect the optical cable to the optical output on the audio source and to the OPTICAL port in the back of the
soundbar (Back View Ref.11).
Press the 'INPUT' button on the remote control (Remote Control Ref.10) or the 'SOURCE/MODE' button on the
top of the soundbar (Front and Top View Ref.5) to switch to 'OPTICAL' mode. The Display will show 'OPTICAL'
(Front and Top View Ref.1).
How do I set the correct audio settings for Optical Mode?
When using the soundbar in Optical mode, or when using the soundbar with a streaming app you may
experience sound issues if you have your audio settings set up incorrectly. Using the native controls on your
connected device, make sure the audio settings are set to PCM or Optical Audio.
This setting can be found within your TV's sound settings, most likely under 'Additional Settings' within the
Sound menu, where you will nd options for 'PCM/Dolby Digital/DTS/DTS Neo 2:5' (refer to your TV's user
manual for more info).
Using the USB Input
Connect your USB stick to the USB port (Back View Ref.12) on the back of the soundbar.
Press the 'INPUT' button on the remote control (Remote Control Ref.10) or the 'SOURCE/MODE' button on the
side of the soundbar (Front and Top View Ref.5) to switch to 'USB' mode. The Display Will show 'USB' (Front
and Top View Ref.1).
Bluetooth Operation
Pairing a Bluetooth Device for the First Time
Press the 'INPUT' button on the remote control (Remote Control Ref.10) or the 'SOURCE/MODE' button on the