Green Feathers GFIP220BWF 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Green Feathers GFIP220BWF에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Feathers GFIP220BWF 13 페이지. Wifi bullet camera kit
Green Feathers GFIP220BWF에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지)

페이지 인쇄

About Your Camera

Mounting the camera

Do not mount up the camera until you have confi rmed that it is all working correctly. The

camera can be mounted to a wall using the screw holes on the mounting arm. The arm can

be fully adjusted so you can angle the camera – simply loosen the screws with an Allen key.

Adjusting the antenna

To attach the antenna screw into the connector. For the best signal range, keep the antenna

pointing up and away from the camera.

Inserting a MicroSD Card

If you are using a microSD card ensure that you insert it before powering the camera.

To insert the card, unscrew the screws underneath the camera to remove the panel. With

the card's pins facing the front of the camera, gently insert the card into the slot.

Powering up the camera

Plug in the power supply into the trailing cable of the camera. Allow 30 seconds for the

camera to boot. The reset button is used during setup and for factory resets.