MAJORITY D40 사용자 설명서 - 페이지 10
{카테고리_이름} MAJORITY D40에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. MAJORITY D40 20 페이지.
MAJORITY D40에 대해서도 마찬가지입니다: 매뉴얼 (7 페이지)
페이지 인쇄
- 1. Table of Contents
- 2. Contents
- 3. Box Contents
- 4. Controls & Functions
- 5. Setting up Your Majority D40 Speakers
- 6. Basic Operation
- 7. Bluetooth, SD & USB Controls
- 8. AUX and Optical Modes
- 9. Bluetooth Mode
- 10. USB & SD Card Mode
- 11. Connecting Headphones
- 12. Troubleshooting
- 13. Spec & Warranty
- 14. Safety Information
AUX AND OPTICAL MODES
EN
Use the 3.5mm to 3.5mm AUX cable or 3.5mm to RCA cable to connect an external
AUX device to the 'AUX' input of the D40 speakers (Ref.15).
Switch to AUX mode
When an AUX cable is plugged in to the AUX port at the rear of the speaker (Ref.15),
the unit will automatically switch to AUX mode (indicated with a red light (Ref.7))
and make 3 short ascending beeps. If necessary, select 'AUX' mode using the 'Mode'
button (Ref.24)/(Ref.3).
Optical mode
To connect the D40 speakers to an external device, use an optical cable to connect via
the OPTICAL input (Ref.10).
Press the 'Mode' button (Ref.24)/(Ref.3) to switch the Mode to Optical. The
corresponding mode indicator light (Ref.7) will light up red and make a short sound
when Optical mode is selected.
Controls and Functions - AUX/Optical
Note: in the table below, (H) = 'Press and hold'.
Remote
- +
X
⏯
TRE-/TRE+
BASS-/BASS+
MODE
RESET
10
Speaker
-/⏮ +/⏭
MODE
n/a
n/a
(H) MODE
n/a
Function
Volume up/down
Mute
Treble up/down
Bass up/down
Change Mode
Reset Treble/Bass