Gamut Phi6 MKII 사용자 설명서 - 페이지 2

{카테고리_이름} Gamut Phi6 MKII에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamut Phi6 MKII 8 페이지.

페이지 인쇄

INTRODUCTION

The materials and constructions chosen for a GamuT

product will make it last a life time and give you years of

musical enjoyment. Thank you for choosing a GamuT

product.

With an optimized production setup we can now offer this

exquisite, strong, and inert enclosure solution for music

lover to enjoy outstanding performance from real world

priced speakers.

Having the new improved sonic foundation from the

laminated form pressed enclosure; we have done our

utmost to optimize other components used, to obtain an

absolute maximum of performance.

We designed a new woofer and midrange driver based

on a wood fiber cone structure, using a size optimized

inverted spike dust cap, a low distorting magnet system

using aluminum shorting rings, and a dynamic linear

suspension. We finished off the performance by hand

doping the cones with our proprietary organic leather oil

treatment, first used for our El Superiores mid/woofer

drivers.

Our tweeter is our well known dual ring tweeter, now

taken to new heights by an optimized version of the NRLI

network.

The NRLI network is assuring seem less integration

between the woofers, midrange and tweeter, by creating

a Non-Resonant perfectly Linked Impulse reproduction.

NRLI

We also optimized the internal acoustics. The new less

resonant character of the enclosure lets us minimize the

use of acoustic damping to obtain a higher level of impact

and dynamic accuracy, as well as improving the quality

and level of bass reproduction.

The Combination of all of the advantages from the new

enclosure, the new higher performing bass/mid drivers,

the optimized NRLI network and the new impulse

accurate internal acoustics, lifts the performance of the

new Phi's way above what can be expected in this size

and price range, and gives the Phi's a performance level

belonging to the top of audiophile musical speakers.

Phi MKII User Manual

Phi3, Phi5 & Phi6 MKII Speakers

•

SETTING UP

A speaker is an acoustic instrument; it will work with your

room and generate a combined character. To minimize the

negative influence from the room and optimize the linearity

of the combined reproduction please follow the simple

guide lines below.

To fine trim the performance, go to the advanced setup

section. Distances are measured from the Tweeter.

Minimum recommendations in a regular setup

Distance to side walls: 4' or 1,2m

Distance to the rear wall: 3' 4" or 1,0m

With the "Narrow room" setup (excessive toe-in where

axis meet in front of the listening position)

Distance to side walls: 2' 4"

Distance to the rear wall: 4'or 1,2m

With both the regular setup and the Narrow room setup,

position you speaker a minimum of 10' or 3m apart and

the listening position a minimum of 10' or 3m from the

speaker.

With a regular setup point the speaker straight forward

With the Narrow room setup (where the 3' clearance to

the side room cannot be achieved, requires a 16' wall

distance) toe-in the speakers so that the axis of the

tweeter is crossing app. 2'-3' or 60-90 cm in front of the

listening position

Adjust the spikes so that a line starting from the top point

of the Midrange (the driver below the tweeter), and run-

ning in parallel with the top of the speaker, is pointing to

your ear height in the listening position.

If trimming of the bass, midrange or tweeter level is

needed; you can adjust the Bass balance by changing the

position of the speaker, the midrange character by ad-

justing the tilt of the speaker, and the tweeter level by

adjusting the toe-in. Visit the advanced setup section for

instructions or e-mail us at: [email protected]