Gamut CD 3 사용자 설명서 - 페이지 5

{카테고리_이름} Gamut CD 3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamut CD 3 16 페이지. High performance cd player

About the GamuT CD 3

The cabinet is a rigid construction with use of massive and genuine high grade materials, such as Alu-

minum and stainless steel. This does not only contribute to the touch and feel factor, but is essential

for a long lasting life even in a tough environment.

A GamuT product is build to be used daily and we expect our product to be in the "ﬁ eld" for many

years to come.

Under normal circumstances the CD 3 should not need inspection or service for quite a while.

Should you experience break down or worn parts, these are easily replaceable or repairable and our

service partners around the world would be happy to help.

All components used in the CD 3 are of the highest quality and have been selected through intensive

listing sessions from the PCB itself over the non-magnetic chassis to the legendary Neutrik XLR con-

nectors.

The CD 3 is based on following Gamut specialties:

•

Double suspended mehcanism

•

Soft coupled feet suspend the complete chassis

•

Internally shielding devides the chassis internally into three seperate cabinets

•

Sound and vibration damped mechanism

•

Separate power supply for control circuit and audio circuits

•

Internal cabling by "Van den hul" high quality cable

•

Digital output with 75 ohm termination option

•

Very powerful power supply with high bandwith and low impedance

Carefully cut open the box with a knife. Remove the cables from the carton and lift up the CD 3 from

inside the box. Remove the protective plastic enclosing the ampliﬁ er. Please be careful not to place

the CD 3 on the front panel or bend the various terminals on the backside when doing so.

Remove the protective tape assuring placement of the tray during transport. The tray is not locked

when inside the player and the player is not connected to mains, by turning the player up side down

the tray will open. It is therefore crutial that you ensure remounting of the piece of adhesive tape

again if transport is needed later on!

Please keep the packaging material in a safe place as it might come in handy later.