Green Force Flexi Kit 3 in 1 DB 사용자 설명서 - 페이지 15

{카테고리_이름} Green Force Flexi Kit 3 in 1 DB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Force Flexi Kit 3 in 1 DB 17 페이지. Modular lighting systems

Charging the Diamond 600-18650

The Diamond 600-18650 runs on a single Lithium 18650 battery. This battery

should be installed with the + pole facing the light head of the Diamond (see in-

dication). Only use the charger supplied with the Diamond 18650 to charge this

battery. Insert the battery in the charger according to the marks on the charger.

While charging, the charging indicator light will turn red. When the battery is fully

charged, the charging indicator light will turn green.

Charging the Diamond 600-AA

The Diamond 600-AA runs on 3 AA sized batteries (Alkaline or rechargeable

NiMH). These batteries should be installed with the + pole facing the light head

of the Diamond (see indication). When using rechargeable NiMH batteries, read

and follow the guidelines provided by the NiMH battery supplier.

Diamond 600-AA

Green Force

Diamond 600 Backup Light

Using your Green Force Diamond 600

To switch on the Diamond 600-AA or 600-18650 dive light, screw the light head

into the battery pack (clockwise). To switch off the dive light, simply unscrew the

light head 1 turn.

Switching between modes (100%, 30%, 7%, strobe & SOS). To switch between

different modes, turn the dive light off and immediately back on. Every time the

dive light is switched off and back on, it will automatically pass on to the next

mode.

100%

off/on

SOS

switch on

switch off

30%

off/on

strobe

off/on