IKEA ISC23CNEXW01 사용자 지침 - 페이지 2
{카테고리_이름} IKEA ISC23CNEXW01에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA ISC23CNEXW01 40 페이지.
페이지 인쇄
IMPORTANT
SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Disconnect
power before servicing.
• Replace all parts and panels before operating.
• Remove doors from your old refrigerator.
• Use nonflammable
cleaner.
• Keep flammable materials and vapors, such as gasoline,
away from refrigerator.
• Use two or more people to move and install refrigerator.
• Disconnect
power before installing ice maker (on ice maker
kit ready models only).
• Use a sturdy glass when dispensing
ice (on some models).
• Do not hit the refrigerator glass doors (on some models).
SAVE THESE INSTRUCTIONS
Proper Disposal of Your Old Refrigerator
Suffocation
Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.
IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigerators are still dangerous
- even if they will sit for "just a few days." If you are getting rid of
your old refrigerator, please follow these instructions to help
prevent accidents.
Before You Throw Away Your Old Refrigerator or Freezer:
•
Take off the doors.
•
Leave the shelves in place so that children may not easily
climb inside.
REFRIGERATOR USE
8q
A_
_: _i?tc{o_ some modes}
On some models, your refrigerator's accessory packet includes
an air filter, which must be installed prior to use. On some models,
Installing
the Filter Status
Indicator
(on some
models)
the air filter is already installed at the factory.
The filter comes with a status indicator, which should be activated
and installed at the same time the air filter is installed.
The air filter reduces the buildup of odors. This helps to maintain a
cleaner environment inside the refrigerator.
Installing the Air Filter (on some models)
The filter should be installed behind the vented door, which is
located (depending on your model) along either the rear or left
interior wall near the top of the refrigerator compartment.
1. Remove the air filter from its packaging.
2. Lift open the vented door.
3. Snap the filter into place.
1. Place the indicator face-down
on a firm, flat surface.
2. Apply pressure to the bubble on the back of the indicator, until
the bubble pops to activate the indicator.
3. Lift open the vented air filter door. On some models, there are
notches behind the door.
2