Green Furniture Concept Ascent Series 매뉴얼 - 페이지 6
{카테고리_이름} Green Furniture Concept Ascent Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Furniture Concept Ascent Series 13 페이지.
페이지 인쇄
1
Attach the Wieland Adaptor Blocks to
the Interconnector Cable, connecting
the male side of the cable to a female
port on the adaptor block. Repeat with all
cables.
3
Insert the connected cables in to the
beam of your bench module.
5
To connect two modules, push them
close together and connect the spiral
cables.
Assembly Instructions
Nova C Electrical Installation
Connect all cables for one module with
adaptor blocks and the spiral cables on
the edges like the image.
Make sure that all the connections are
centered right in front of the cut outs on
the back side of the beam. Otherwise
it will not be possible to attach add ons
that requires electricity.
Before connecting the cables, make sure
that they are inserted to the beams in the
right direction so that a male connector
meets a female connector.
6
2
4
6
Green Furniture Concept