Century CC1212 소유자 매뉴얼 - 페이지 5
{카테고리_이름} Century CC1212에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Century CC1212 13 페이지. 9-stage battery charger and maintainer
페이지 인쇄
ELECTRICAL PARTS & ACCESSORIES:
AC Power Cord:
DC Output Lead:
Charging Leads:
TECHNICAL SPECIFICATIONS:
Model Number
Output
Input Voltage
Input Frequency
Charge Voltage
Equalising Voltage
Float Voltage
Start Voltage
Operating Temperature
Storage Temperature
Operating Humidity
Size (L*W*H)
Weight
Approvals
CHARGING INSTRUCTIONS:
STEP 1 - Pre charge check & electrolyte level check
•
Check the Battery Electrolyte levels (On Sealed Maintenance Free batteries, check the State of
Charge indicator). If necessary, remove the vent caps and add distilled water so the levels are
halfway between the upper and lower fill lines.
•
Check the battery voltage, type and Ah capacity to ensure the charger is compatible and to
determine which Battery Type and Charge Rate settings you will use.
Visit http://www.centurybatteries.com.au/battery-charging or
http://www.centurybatteries.co.nz/battery-charging for advice on which Battery Type and
Charge Rate settings to select.
•
Ensure the battery is in a well ventilated area and the charger should be as far away from the
battery as the cables permit.
4 • Owner's manual - Model. CC1212
1.8m with SAA 2 Pin AU Plug
1.2m with quick connect
Quick connect 60cm Crocodile Clip harness and 60cm
Ring Terminal harness
CC1212
12A @ 12V DC
220-240Vac / 1.8A (175W)
50Hz
Gel - 14.1V
AGM/Flooded - 14.4V
SMF [Calcium] - 14.7V
Gel - 14.3V
AGM/Flooded - 14.6V
SMF [Calcium] - 16.2V
13.6V
3V
-15 to 50° C
-25 to 85°C
90% RH Max.
218mm x 101mm x 55mm
1.1kg (approx.)
CE, UL/cUL, AS/NZS, EMC