Gandy 36T13 부품 및 조립 매뉴얼 - 페이지 12

{카테고리_이름} Gandy 36T13에 대한 부품 및 조립 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gandy 36T13 17 페이지. 24” & 36” spreaders
Gandy 36T13에 대해서도 마찬가지입니다: 운영자 매뉴얼 (8 페이지), 운영자 매뉴얼 (10 페이지)

페이지 인쇄
Gandy 36T13 부품 및 조립 매뉴얼
Step #11
(Sash Chain to Spread Plate Assembly)
1.
Locate Sash Chain (28368785-1) and the small hairpin cotter 1/8 x 1-15/16 (C21-0125-020).
2.
Insert sash chain into hole in spread plate as shown in Diagram #20
3.
Connect the small hairpin cotter to the bottom most link on the sash chain.
4.
Pull sash chain up so the hairpin cotter contacts the spread plate.
Diagram #20
Step #12
(Connect Sash Chain to Handle)
Turn spreader upright so it sits up on its wheels.
Pivot spread plate towards the hitch, then connect the S-Hook on the sash chain to the center hole on the hitch
plate as shown in Diagram #21.
Diagram #21
Page 12 of 17
2836-T7
2836-T7