Green Gear Hinge Forward 사용자 설명서 - 페이지 7

{카테고리_이름} Green Gear Hinge Forward에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Gear Hinge Forward 17 페이지.

Getting Started

Fig. 8-9 Installing rear wheel.

Install wheels

First, install the quick release from the dropout protectors

into the front and rear wheels (if applicable; this step does

not apply to wheels with a nutted axle). Make certain that

there is only one spring per side and that the small end of

the spring is pointing to the center of the hub on each side.

Loosely thread the knurled nut onto the skewer for now.

Next, install the rear wheel.

Guide the rear wheel into the frame's dropouts. Make sure

the axle is fully seated into the dropout on each side of the

frame, then close the quick-release skewer or tighten the

axle nuts to secure the wheel.

NOTES:

If your bicycle has a chain, guide the chain onto the smallest

cog on the wheel as you move the wheel into the dropouts.

If your bicycle has a belt, position the belt onto both the

wheel's cog and the crankset cog while keeping light tension

on the belt and moving the wheel into the dropouts.

Connect the shift mechanism. For Internally Geared Hubs

refer to the hub manufacturer's instructions included in the

Goodie Bag for detailed instructions on attaching and remov-

ing your hub's shifting system.

Install the Front Wheel. Make certain the wheel is fully

seated in the fork dropouts, and securely close the quick-

release lever.

Continue on Page 16 of the Bike Friday Pocket Bike manual

for assembly of handlebars, seatpost, pedals, etc.

800-777-0258 • +1-541-687-0487