Green Gorilla ProLine 사용자 설명서 - 페이지 15

{카테고리_이름} Green Gorilla ProLine에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Gorilla ProLine 20 페이지. Industrial system

Prior to rst use, it is highly recommended that an initial rinsing of the tank be

preformed. This is to ensure that any debris resulting from manufacturing has

been removed prior to running liquid through the wand. This will minimize

clogging of the strainer or wand tip and ensure proper wand operation.

Prior to lling, disconnect the PowerPack, to

reduce solution spills onto the unit (see page

11, PowerPack Removal).

Mix your solution as directed by the manufac-

turer's instructions, and ll tank to desired

level (careful not exceed the maximum

working volume of your tank).

Assemble the manual pump and handle onto

the top of the tank by engaging threads and

rotate clockwise until the o-ring seal [under-

side of cap] is fully seated ( gure 35).

Lock handle in place by rotating the pump

handle 90 degrees clockwise until a positive

click is felt.

IMPORTANT! Do not carry the tank by the

handle until the handle is in the locked

position. Damage may occur.

Seat the pressure relief valve by

depressing the red pin on the Quick

Connect Adaptor 2-3 times as

shown in gure 36. Completion of

this step is to ensure seating of the

internal seals.

Attach PowerPack (see page 11,

PowerPack Attachment).

Tank Operation

g. 35

g. 36

Pg. 14