KitchenAid KECD867XSS02 설치 지침 매뉴얼 - 페이지 3
{카테고리_이름} KitchenAid KECD867XSS02에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KECD867XSS02 20 페이지. 30" and 36" electric downdraft cooktop
페이지 인쇄
s}c<x o
' s:ents
IMPORTANT:
Observe all governing codes and ordinances.
36" (91.4 cm) Cooktop
- for standard
and electric
models
When installing cooktop,
use minimum dimensions given.
•
To eliminate the risk of burns or fire by reaching over the
heated surface units, cabinet storage space located above
the surface units should be avoided. If cabinet storage is to
be provided, the risk can be reduced by installing a range
hood that projects horizontally a minimum of 5" (12.7 cm)
beyond the bottom of the cabinets.
•
Use the countertop opening dimensions that are given with
these Installation Instructions. Given dimensions are
minimum clearances and provide 0" (0 cm) clearance.
•
Grounded electrical supply is required. See "Electrical
Requirements"
section.
•
If cabinet has drawers, drawers will need to be removed and
drawer fronts installed on front of cabinet.
IMPORTANT: An under-counter
built-in oven cannot be installed
under this product.
Product Dimensions
30" (76.2 cm) Cooktop - for standard and electric models
B
'A
A. Model/serial
rating/clearance
plate
location
B. 21 " (53.4 cm) screw head to screw head
C. 22" (52.3 cm) without stainless steel trim or
2137/e4" (54.8 cm) with stainless steel trim
A
G
A
A. Model/serial rating/clearance
plate location
B. 21" (53.4 cm) screw head to screw head
C. 22" (52.3 cm) without stainless steel trim or
2137/64 ' ' (54.8 cm) with stainless steel trim
A.
3511/32 '' (89.8
cm)
B. 127/8 ' ' (32.8 cm) centerline of
product
to edge
of burner box
C. 127/8 ''
(32.8 cm)
D. 341/8 '' (87.3 cm)
D
E. 121/2 ' ' (31.8 cm)
F.
817/64
''
(20.g cm)
recommended minimum
cabinet to motor clearance
G. 18" (45.7 cm)
H. 45/8 '' (11.8cm)
_C
i_E
_
A. 293/4 '' (75.6 cm)
B. 121/2 ' ' (31.8 em)
centerline of product to
edge
of burner box
C. 121/2 ''
(31.8 cm)
D. 28%" (73.3 cm)
E. 121/2 '' (31.8 cm)
F. 2" (5.1 cm) recommended
minimum
cabinet to motor clearance
G. 18" (45.7 cm)
H. 45/8'' (11.8 cm)