KitchenAid KECG260 사용 및 관리 매뉴얼 - 페이지 12

{카테고리_이름} KitchenAid KECG260에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KECG260 16 페이지. Electric built-in cooktops
KitchenAid KECG260에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (16 페이지), 설치 지침 매뉴얼 (6 페이지)

페이지 인쇄

CARE AND CLEANING

Several finishes have been used on this cooktop, and some require special atten-

tion to the cleaning methods used to extend the life of your cooktop. To keep it

looking new, follow the instructions below on cleaning certain parts of your

cooktop.

NOTE: Be sure all cooktop

parts are cool before cleaning.

CONTROL

KNOBS--Place

control knobs in the "OFF" position. Remove by

firmly pulling them straight off the switch stem. Wash in warm, soapy water. Dry

and return knobs, making sure "OFF" is at the 12 o'clock position.

TEMPERED

GLASS CONTROL

PANEL

Remove control knobs. Clean with

mild glass cleaner or with clear warm water only. Soaps and detergents will leave a

filmy residue. When cleaning control panel with knobs removed, DO NOT allow

water to run down inside unit.

COOKTOP

ELEMENT--The

elements can be wiped wilh a slightly damp cloth, if

necessary. Spills can be "burned off," see page 8.

TO REMOVE ELEMENTS:

• Always be certain that the control for that element is at OFF position and the coils

are cool before attempting Io remove the element.

• Raise the element, at poinl opposite receptacle, about 1 inch above the drip bowl

and pull it away from the receptacle.

• Carefully pull the element terminals through the opening in the drip bowl. After

removing the element, remove the drip bowl to clean under the unit.

• Wipe around edges of the opening of the cooktop with a sudsy cloth and rinse

with damp cloth or sponge.

CAUTIONS:

,, DO NOT immerse elements in water or other liquid, or wash in dishwasher.

• DO NOT attempt to clean elements or chrome.

• Handle elements with care so as not 1o bend the terminals. The terminals are

sturdy and will not damage easily if handled with reasonable care. If the termi-

nals are damaged or bent, the element should be replaced.

• DO NOT attempt to clean, adjust, or in any way repair the element receptacle. If

a large amount of liquid should accidentally spill and collect inside the recepta-

cle, call for service.