decon INFM7215 조립 지침 매뉴얼 - 페이지 6

{카테고리_이름} decon INFM7215에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. decon INFM7215 8 페이지.

Mounting set

INFM7X02

__________________________________________________________________________________

Now use the leveling tool that is included in the delivery of Infinity. Since the adapter bar

have splines inside it will not be possible to get the bubble of the spirit level exactly right.

Just choose the most correct position.

The leveling tool has two marks "H" and "L". When the bubble of the spirit level is towards

the "H" the castors of the wheelchair will lift higher from the ground compared to if the

bubble of the spirit level is towards the "L".

Adjustment of the angle can be done in two different manners. Both is descriped bellow.

Alt1.

Using the adjustment tool that

is included in the delivery of

Infinity (not this mounting set),

set the angle of the adaptorbar

so that the spirit level is in level.

Inside the pipes there are

splines so when rotating you

will feel and hear a clicking.

When desired angle have been

accomplished, check that the

center pipe is centered in the

wheelchair. Now tighten the

screws in the clamps (C).

WARNING!

The screws holding the clamps

of torque.

__________________________________________________________________________________

Sida 6/8