IKEA BEJUBLAD 사용 설명서 - 페이지 14

{카테고리_이름} IKEA BEJUBLAD에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA BEJUBLAD 24 페이지. Ikea oven
IKEA BEJUBLAD에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지), 매뉴얼 (24 페이지), 매뉴얼 (48 페이지), 매뉴얼 (16 페이지), 사용 설명서 (36 페이지), 매뉴얼 (8 페이지), 매뉴얼 (41 페이지), 매뉴얼 (20 페이지), 매뉴얼 (32 페이지)

페이지 인쇄

ENGLISH

Cleaning and maintenance

CLEANING

WARNING!

Never use steam cleaning equipment.

Only clean the oven when it is cool to

the touch.

Disconnect the appliance from the

power supply.

Oven exterior

IMPORTANT: do not use corrosive or

abrasive detergents. If any of these

products accidentally comes into contact

with the appliance, clean immediately with

a damp cloth.

•

Clean the surfaces with a damp cloth.

If it is very dirty, add a few drops of

washing up detergent to the water.

Finish off with a dry cloth.

Oven interior

IMPORTANT: do not use abrasive

sponges or metallic scrapers or scourers.

Over time, these can ruin enamelled surfaces

and the oven door glass.

After every use, allow the oven to cool

•

then clean it preferably while it is still

warm in order to remove built-up dirt

and stains caused by food residues (e.g.

food with a high sugar content).

Use proper oven detergents and follow the

•

manufacturer's instructions to the letter.

•

Clean the door glass with a suitable

liquid detergent. The oven door can

be removed to facilitate cleaning (see

MAINTENANCE). Inner glass is smooth

to facilitate cleaning.

NOTE: during prolonged cooking of foods

with a high water content (e.g. pizza,

vegetables, etc.) condensation may form on

the inside of the door and around the seal.

When the oven is cold, dry the inside of the

door with a cloth or sponge.

Accessories

Soak the accessories in water with

•

washing up detergent immediately after

use, handling them with oven gloves if

still hot.

•

Food residues can be easily removed

using a brush or sponge.

MAINTENANCE

WARNING!

Use safety gloves.

Ensure the oven is cold before carrying

out the following operations.

Disconnect the oven from the power supply.

To remove the shelf guides

firmly grip the external part of the guide,

and pull it towards you to extract the

support and the two internal pins from the

lodging.

To reposition the shelf guides

position them near the cavity and initially

insert the two pins into their lodgings. Next,

position the external part near

its lodging, insert the support, and firmly

press towards the wall of the cavity to make

sure the shelf guide is properly secured.