KitchenAid KFGS366VSS01 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} KitchenAid KFGS366VSS01에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KFGS366VSS01 20 페이지. 30" (76.2 cm) and 36" (91.4 cm) gas built-in cooktop
KitchenAid KFGS366VSS01에 대해서도 마찬가지입니다: 부품 목록 (5 페이지)

페이지 인쇄

Turn adjustment screw "C"totheright t oreduce f lame

height, turnadjustment screw tothelefttoincrease flame

height.

5. Tighten screw "A"toreduce f lame height. Loosen s crew to

increase flame height.

A. _z" (#0 [2.0 mm]) flat blade screwdriver

(screwdriver shaft must be a minimum of

1 _" (28.0 mm) long)

B. Control knob stem opening

C. Adjustment

screw location

4. Replace the control knob.

5. Test the flame by turning the control from LO to HI, checking

the flame at each setting

Adjustment for Dual Valve:

1. Set the inner crown flame to LO.

A. Adjustment screw - inner crown

B. Adjustment screw - outer crown

6. Replace the control knob.

7. Set the outer crown flame to LO.

8. Remove the control knob.

9. Tighten screw "B" to reduce flame height. Loosen screw to

increase flame height.

10. Replace the gray shield. Use a screwdriver to help push the

shield into place.

11. Replace the black rubber grommet.

12. Replace the control knob.

13. Test the flame by turning the control from LO to HI, checking

the flame at each setting.

If you need Assistance

or Service:

Please reference the "Assistance or Service" section of the Use

and Care Guide or contact the dealer from whom you purchased

your cooktop.

A. Inner crown

B. Outer crown

Remove the control knob.

Remove the black rubber grommet.

Using needle-nose pliers, remove the gray shield inside the

burner valve opening.

..... A

A. Control knob

B. Black rubber grommet

C. Gray shield