AFRISO DMU 10 D 사용 설명서 - 페이지 7

{카테고리_이름} AFRISO DMU 10 D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AFRISO DMU 10 D 9 페이지. Differential pressure transmitter

DMU 10 / DMU 11

6. Decommissioning

When dismantling the device, it must always be done in the depressurized and

currentless condition!

7. Maintenance

In principle, the device requires no maintenance.

If necessary, clean the housing of the device using a moist cloth and a non-aggressive cleaning

solution.

8. Recalibration

The offset value or range value may shift during the life of the device. In this case, a devia-

ting signal value in relation to the set lower or upper measuring range value is output. If one

of these two phenomena occurs after extended use, a recalibration in the factory is recom-

mended. Please note the chapter "Service/Repair" with regard to this.

9. Returning the device

Get in touch with us before returning your product ([email protected]).

A declaration of decontamination must be enclosed with the device for every return, regar-

dless of whether it is for recalibration, decalcification, conversion or repair. Corresponding

templates can be found on our homepage.

Devices without a declaration of decontamination will only be examined after receipt of a

corresponding declaration in case of doubt regarding the medium used!

10. Decommissioning, diposall

Dispose of the product in compliance with all applicable directives, standards and safety

regulations.

1. Disconnect the product from mains.

2. Dismount the product (see chapter "Mounting", reverse sequence of

3. Dispose of the product.

11. Warranty

See our terms and conditions at www.afriso.com or your purchase contract for information on

warranty.

steps).