decon ADV5314 조립 지침 매뉴얼 - 페이지 8

{카테고리_이름} decon ADV5314에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. decon ADV5314 9 페이지. Adventus adapter bar r82 kudu

Assembly Instructions

ADV5314, ADV5014

__________________________________________________________________________________

Now tighten the screws that sits in the clamp of the adaptor bar (A) and the ones holding the

fork (B). In both clamps screws shall be tightened gradually until the desired torque is

achieved. Keep tightening until 30-34Nm is achieved for the adaptor bar clamp (A) and 9-

10Nm for the one holding the fork (B). Also make sure that the fork is still centred and the

angle of the adjustment tool is still correct.

Check one last time that all screws are properly secured. Now see the user manual of

Adventus to continue the installation. This can be downloaded from www.decon.se/en/

__________________________________________________________________________________

Sida 8/9