IKEA HGC4K 매뉴얼 - 페이지 7
{카테고리_이름} IKEA HGC4K에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA HGC4K 44 페이지. Hobs
IKEA HGC4K에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지)
페이지 인쇄
ENGLISH
Care and cleaning
Warning! Switch the appliance off and
let it cool down before you clean it.
Warning! For safety reasons, do not
clean the appliance with steam blasters
or high-pressure cleaners.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance. Clean the appliance and remove
the residues with water and washing up
liquid after each use. Remove also the
remnants of the cleaning agents!
Scratches or dark stains on the glass ce-
ramic that cannot be removed do not af-
fect the functioning of the appliance.
What to do if...
Problem
The cooking zones are not
functioning.
The residual heat indicator is
not displaying anything.
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a sol-
ution to the problem yourself, contact your
dealer or the After Sales Service.
Removing the residues and stubborn
residues:
1. Food containing sugar, plastics, tin foil res-
2. Limescale rings, water rings, fat splashes,
Possible cause
The desired heat setting is
not set.
The fuse in the house electri-
cal installation (fuse box) has
been tripped.
The cooking zone was only
on for a short time and is
therefore not hot.
a registered engineer, the visit from the cus-
tomer service technician or dealer may not
take place free of charge, even during the
warranty period.
idues should be removed at once, best
tool for cleaning glass surface is a scraper
(not included with the appliance). Place a
scraper on the glass ceramic surface at
an angle and remove residues by sliding
the blade over the surface. Wipe the ap-
pliance with a damp cloth and a little
washing up liquid. Finally, rub the appli-
ance dry using a clean cloth.
shiny metallic discolorations should be re-
moved after the appliance has cooled
down using cleaner for glass ceramic or
stainless steel.
Remedy
Set the heat setting.
Check the house electrical in-
stallation fuse. If the fuses trip
a number of times, please
call an authorized electrician.
If the cooking zone is sup-
posed to be hot, call the Af-
ter Sales Service.
If you operated the appliance wrongly,
or the installation was not carried out by
7