Decon wheel MEM6319 조립 지침

{카테고리_이름} Decon wheel MEM6319에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Decon wheel MEM6319 4 페이지. For rea dahlia

Assembly instructions for Rea Dahlia

1. Check if you have the right type.

1. Check if it is possible to place the battery bag on the back of the seat, if so you can use

a back placed battery bag, if else you need to have the Invacare part Accessory Tray

with Part No: 1574433. The part is needed for assembly the battery. But if you use this

alternative you are not able to use the tilt peddle.

2. Remove wheel, brake, adapter bracket, brake handle on both sides.

3. The easiest way to remove the parts is to loosen the screws that hold the adapter

bracket. Do this on both sides and just lift up the wheelchair. After that you loosen the

screws that hold the brake handles. Remember too save the screws and bracket for

recycling, they are for assembling of the new brackets.

MEM6319 and MEM6320

Recycled parts

2017-11-09