IKEA Livsgnista 사용 설명서 - 페이지 11

{카테고리_이름} IKEA Livsgnista에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA Livsgnista 37 페이지. Ikea livsgnista hob instruction manual

페이지 인쇄

ENGLISH

Technical data

Dimensions

Width (mm)

Height (mm)

Length (mm)

Voltage (V)

The technical information are situated in the

rating plate on the bottom side of the appliance.

Installation

Use protective gloves for handling,

preparing and installing the product.

After unpacking the hob, make sure that it

has not been damaged during transport. In

the event of problems, contact the dealer or

your nearest After-sales Service.

Technical information for the installer

This product can be embedded in a

worktop 20 to 60 mm thick.

If there is no oven beneath the hob,

insert a separator panel that has a

surface at least equal to the opening

in the work surface. This panel must be

positioned at a maximum distance of

150 mm below the upper surface of the

work surface but, in no case less than 20

mm from the bottom of the hob.

Before installation, make sure that:

the local gas delivery conditions (nature

and pressure) are compatible with the

settings of the hob (see the rating plate

and injector table);

590

510

220-240 V ~

the outer surfaces of the furniture or

appliances adjacent to the hob are heat

resistant according to local regulations;

This appliance is not connected to a

fume exhaust device. It shall be installed

in accordance with current installation

regulations. Particular attention shall

be given to the relevant requirement

regarding ventilation.

Combustion products are discharged

outdoors through specific hoods or wall

and/or window mounted electrical fans.

Gas connection

This operation must be performed by a

qualified technician.

The gas supply system must comply with

local regulations to the relavant gas

standard.

You can find specific local regulations for

some countries in the paragraph

"Reference to Local Regulations". If no

information concerning your Country is

1 1