HIKVISION DS-PDPC12P-EG2-WB(B) 사용자 설명서 - 페이지 5
{카테고리_이름} HIKVISION DS-PDPC12P-EG2-WB(B)에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-PDPC12P-EG2-WB(B) 5 페이지.
페이지 인쇄
5
Operation Caution and Device Maintenance
- All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention
regulations and other related regulations in your local region.
- Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation.
Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment
damage).
- Please make sure that the power has been disconnected before you wire, install or dismantle the device.
- If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then
please contact the service center.
- Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation.
Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment
damage).
- Do not place the device in extremely hot (refer to the specification of the device for the detailed operation
temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation.
- The device for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden
(ignorance can cause fire danger).
- Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not
a malfunction however), and affecting the endurance of sensor at the same time.
- Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufactur-
er.
- Do not expose the device to the corrosive gas. Otherwise the equipment damage may occur.
- Do not expose the device to the explosive situation.
6
Specification
PIR
Camera
Wireless technical
characteristics
Electrical and battery
Environmental and
operating features
Mounting
7
Reference Table
1st Photo transmission time
- 160 x 120
- 320 x 240
- 640 x 480
Internal memory buffer
- 160 x 120
- 320 x 240
- 640 x 480
Detection range
Coverage angle
Detection speed
Creep zone protection
Auto sensitivity
Pet immunity
Digital temperature compensation
Technology
Sealed optics
Direct light filter
Tamper protection
LED indicator
Encapsulated PCB
Lens coverage
Auto day and night
IR LED
IR Range
Image type
Image size
Wireless technology
Two-way wireless communication
Transmission frequency
RF range
Transmission encryption
Enrolling methods
Signal strength indicators
Environment temperature indicator
Battery
Standard battery life
Dimension (W × H × D)
Weight
Storage temperature
Operating temperature
Operating humidity
Installation height
Bracket
5s (5KB per image)
6s (10KB per image)
12s (60KB per image)
160 images (5KB per image)
80 images (10KB per image)
25 images (30KB per image)
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
12m
85.9°
0.3 to 2 m/s
Supported
Supported
Up to 30Kg (Height<40cm)
Supported
Digital microprocessor based
Supported
6500lux
Front and back
Alarm (blue)
Supported
DS-PDPC12P-EG2-WE/WB: 88°(H), 68°(V)
DS-PDPC12P-EG2-WE(B)/WB(B): 90°(H), 70°(V)
Colour/Black & White
1 IR LED
12m
JPEG
160x120, 320x240, 640x480
CAM-X Wireless Technology
Supported
868/433 MHz
800m (open space)
AES encryption
Power up, remote ID and QR code
Supported
Supported
CR123A x 3 (included)
6 years
72.2mm × 120.5mm × 56.7mm
210g
-20°C to 60°C
-10 °C to 55 °C (14 °F to 131 °F)
-10 °C to 40 °C (14 °F to 104 °F) EN Certified
10% to 90%
1.8 to 2.4m
Optional wall and ceiling accessory
UD25920B