ENGLISH
Problem
symbol plus a number
appears on the timer dis-
play.
lights up on the timer
display.
If there is an error, first try to find a solution
to the problem yourself. If you cannot find a
solution to the problem yourself, contact
your IKEA store call centre. You can find a
full list of IKEA appointed contacts at the
end of this manual.
Installation
Warning! Refer to Safety
chapters.
General information
Installation process must follow
the laws, ordinances, directives
and standards (electrical safety
rules and regulations, proper
recycling in accordance with the
regulations, etc.) in force in the
country of use!
Possible cause
Electronic component error.
The second phase of the
power supply is missing.
Important!
• For the minimum distances from the other
• If there is no oven beneath the hob insert
• Do not use silicon sealant between the
Disconnect the appliance
from the electrical supply for
a few minutes. Remove the
fuse, wait one minute, and
insert the fuse again. If the
problem continues, ensure a
correct installation by calling
an authorised installer.
Check if the appliance is
connected correctly to the
electrical supply. Remove
the fuse, wait for one minute,
and insert the fuse again. If
the problem continues, en-
sure a correct installation by
calling an authorised instal-
ler.
If you operated the appliance
wrongly, or the installation was
not carried out by a registered
engineer, the visit from the After
Sales Service technician or
dealer may not take place free
of charge, even during the
warranty period.
appliances or cabinets and further
information on the installation refer to
the Assembly Instruction.
a dividing panel at a minimum distance
of 20 mm from the bottom of the hob.
appliance and the worktop.
14
Remedy