IKEA MATMASSIG 매뉴얼 - 페이지 38

{카테고리_이름} IKEA MATMASSIG에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA MATMASSIG 44 페이지.
IKEA MATMASSIG에 대해서도 마찬가지입니다: 매뉴얼 (28 페이지), 매뉴얼 (24 페이지), 매뉴얼 (44 페이지), 매뉴얼 (28 페이지), 매뉴얼 (48 페이지), 매뉴얼 (36 페이지), 매뉴얼 (28 페이지), 매뉴얼 (44 페이지), 매뉴얼 (29 페이지), 매뉴얼 (12 페이지), 매뉴얼 (48 페이지)

페이지 인쇄

ENGLISH

Connection cable

• The appliance is supplied with the

connection cable.

• Replace the damaged mains cable only

with the spare parts cable. Contact your

IKEA store call centre.

Caution! Do not solder any

wires!

One-phase connection

The mains cable is provided for a one-

phase connection.

Two-phase connection for maximum

power (7200 W)

One-phase connection - 230 V~

Power limitation

Originally the appliance works at the

highest possible power level (7200 W).

To decrease or increase the power level:

1. Deactivate the appliance.

2. Touch

for 3 seconds. The display

comes on and goes off.

3. Touch

for 3 seconds.

on.

4. Touch

. P 72 comes on.

5. Touch

power level.

Power levels

• P 72 — 7200 W

• P 15 — 1500 W

• P 20 — 2000 W

• P 25 — 2500 W

• P 30 — 3000 W

Green - yellow

Blue and blue

Black and brown

comes

of the Timer to set the

1. Remove the cable end sleeve from black

and brown wires.

2. Remove an insulation of the brown and

black cable ends.

3. Apply a new wire end sleeve of 1.5 mm²

on each cable end (a special tool

required).

230V~

Two-phase connection - 400 V 2 ~ N

Green - yellow

Blue and blue

Black

Brown

• P 35 — 3500 W

• P 40 — 4000 W

• P 45 — 4500 W

• P 50 — 5000 W

• P 60 — 6000 W

To confirm your selection wait until the

appliance deactivates automatically.

If you accidentally press

twice, a list of codes comes on.

This is only relevant for service

purposes. To leave this menu

touch

again or wait until the

hob deactivates automatically.

Caution! Make sure that the

selected power fits to the house

installation fuses.

400V 2~N