ENGLISH
• cast iron;
• enamelled steel;
• carbon steel;
• stainless steel (most types);
• aluminium with ferromagnetic coating or
a ferromagnetic plate.
To determine if a pot or pan is suitable,
check for the symbol
the bottom of the cookware). You can also
hold a magnet to the bottom. If it clings to
the underside, the cookware will work on the
induction hob.
To ensure optimum efficiency, always use
pots and pans with a flat bottom that
distributes the heat evenly. If the bottom is
uneven, this will affect power and heat
conduction.
How to use
Minimum diameter of pot / pan base for
the different cooking areas
To ensure that the hob operates properly,
the cookware must have a suitable minimum
diameter as well as cover one or more of the
reference points indicated on the surface of
the hob.
Always use the cooking zone that best
corresponds to the diameter of the bottom
of the cookware.
Cooking zone
Care and cleaning
General information
Warning! Switch off the appliance
and let it cool down before you
clean it.
Warning! For safety reasons, do
not clean the appliance with
steam blasters or high-pressure
cleaners.
(usually stamped on
Cookware diame‐
ter [mm]
Left rear
Left front
Right rear
Right front
Empty or thin-based pots / pans
Do not use empty pots / pans or cookware
with thin bases on the hob as it will not be
able to monitor the temperature, or will turn
off automatically if the temperature is too
high. This may result in the damage of the
cookware or the hob surface. If such a
situation occurs, do not touch anything and
wait for all components to cool down.
If an error message appears, refer to
"Troubleshooting".
Hints / tips
Noises during cooking
When a cooking zone is active, it may hum
briefly. This is characteristic of all ceramic
glass cooking zones and does not impair
either the function or the life of the
appliance. The noise depends on the
cookware used. If it causes considerable
disturbance, it might help to change the
cookware.
Warning! Sharp objects and
abrasive cleaning agents will
damage the appliance. Clean the
appliance and remove the
residues with water and dish soap
after each use. Remove also the
remnants of the cleaning agents.
Scratches or dark stains on the
glass ceramic that cannot be
removed do not affect the
functioning of the appliance.
38
145 - 180
125 - 210
145 - 180
125 - 145
페이지 인쇄