Gantom Gantom 7 사용자 설명서 - 페이지 7

{카테고리_이름} Gantom Gantom 7에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gantom Gantom 7 8 페이지. Compact seven color dmx spotlight

The Gantom 7 can be given any DMX address from 1-506. To set your DMX address, first connect the

Gantom 7 to the DMX Programmer app by Gantom as was outlined earlier in this document. With the

Generic Console screen open, you should have full control of the fixture through the channel sliders. If

the light fixture is connected to the app but is not responding, try power cycling the light fixture.

SELECTING A DIFFERENT DMX CHANNEL MAPPING PROFILE

In order to select the preferred DMX channel mapping profile, you will need to follow the same

procedure for addressing the fixture, but instead of a fixture address you will enter one of the numbers

from the following table:

Address to Enter:

Once you have entered the address corresponding to the desired profile, hit the "ASSIGN ADDRESS"

button. The light fixture should then cycle through a sequence of color flashes that matches the profile

you have selected. Please note that this will NOT actually change the DMX address of the fixture, since

the fixture can only be set to address 1-506.

ADDRESSING YOUR GANTOM DMX

Once you have verified that the light fixture is responding to control

signal from the app, tap the number field next to the word

"Address". A new screen will pop up, prompting you to enter a DMX

address. After you enter your desired DMX address, the app will

return to the Generic Console screen. Finally, you must hit the

ASSIGN ADDRESS button in order to save the new address into the

fixture. Hitting the "Save" button will not save anything to the light

fixture's memory.

Channel Mapping Profiles

RGB RGBA RGBW (M)RGBAWU (M)RGBAWLU

507

508

Gantom 7 User Guide

509

510

511

Version 1.0 – 12/15/2017