Gantom GT81 사용자 설명서 - 페이지 9

{카테고리_이름} Gantom GT81에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gantom GT81 10 페이지.

SHUTTER ADJUSTMENT AND LOCKING

The Gantom Juni features 4 independently adjustable framing shutters which are perfect for creating

rectangles, triangle, trapezoids, slits, or irregular shapes for selective lighting. This gives you the ability

to add a crisp angular edge to your beam. This feature is perfect for highlighting a table or piece of art

with minimal light spill.

With the light powered on, use the handles to adjust the placement of the shutters. Note that the side

which is being adjusted will be mirrored and inverted on the light output. This means that when you

adjust the shutter on the RIGHT side of the fixture, the image will be adjusted on the LEFT side. When

you adjust the shutter on the TOP side of the fixture, the image will be adjusted on the BOTTOM side.

Once the shutters are adjusted, you can lock them in place by tightening one of the highlighted set

screws. Note that there are 3 set screws around the fixture, but only one must be tightened to lock the

shutters in place. For best results, we advise tightening down all three set screws equally.

Gantom Juni User Guide

Version 1.0 – 3/31/2021