Gantom ST133 사용자 설명서 - 페이지 10

{카테고리_이름} Gantom ST133에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gantom ST133 15 페이지.

CONFIGURING THE STORM FORM DMX

Due to its compact size, the Storm Form DMX cannot use a physical DIP

switch for addressing. Instead, the Storm Form DMX is programmed

using the DMX Programmer App by Gantom or by using the DarkBox

Programmer V2 programming device (part# DB32, pictured right). In

addition to setting the DMX starting address for the fixture, this will

allow you to save a default color and brightness for the fixture if the

application does not require any DMX control.

Configuring light fixtures with the DarkBox Programmer V2 Device:

For details on how to configure your fixture using the DarkBox

Programmer V2, please consult the user guide for that product. The

DarkBox Programmer V2 device is the easiest and most reliable way to

configure Gantom fixtures and is the preferred option when available.

Configuring the light fixture with the DMX Programmer App:

When the DarkBox Programmer V2 standalone programming device is unavailable, it is also possible to

configure the settings of the device using our free app for iOS and Android devices.

What you need:

o A CB107 Pro Cable Programming Adapter

o An Android or iOS device for running the Gantom Programmer app. Please note that a

headphone port is required to connect to the device to the fixture. The iPhone7 does work

with, but you will need to use the headphone port adapter that is included with the phone.

o A male-to-male 3.5mm audio 3.5mm cable. This is the same type of cable that you would use to

connect your Android or iOS device to headphones or to an AUX port.

o Power supply for the fixture. All Gantom fixtures accept 12v DC power. We recommend using

one of our PowerPak Mini units if you are just going to power a single fixture.

o The free DMX Programmer app by Gantom. This can be found by searching "Gantom" in iTunes

for an Apple device or Google Play for an Android device

First, open the DMX Programmer app by Gantom. The app will open to the screen you see here.

From this screen, select Generic Console. (note: a Storm Form DMX menu option

may be added to the app at a later date)

The app will then provide you instructions on how to connect the light fixture to

the tablet or smartphone. Please note the order in which the cables should be

connected. First connect the headphone cable to the light fixture and to the

tablet/smartphone. Next, connect the power to the fixture. When prompted by

the app, tap the "Next" button and you will be taken to the control screen.

Storm Form and Storm Form DMX User Guide

Version 1.1 – 2/25/2021