Gantom Storm Form 매뉴얼 - 페이지 2
{카테고리_이름} Gantom Storm Form에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gantom Storm Form 15 페이지. Micro gobo projector
Gantom Storm Form에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)
페이지 인쇄Safety and Operation notes:
Please carefully review the following safety notes regarding the Storm Form micro gobo projector. These
notes are important for safe installation and usage of the product.
Do not look directly at the light source while the fixture is powered on.
Inspect all power cables for damage or crimped cable before use.
Make sure that your circuit is properly grounded and all electrical safety precautions have been
taken to prevent electric shock.
Be aware that the fixture will become HOT to the touch when it is left on.
Allow several minutes for the light to cool before touching it after extended periods of on time.
Ensure that there are no flammable materials close to or in contact with the light fixture.
Never touch the lenses within the fixtures. If the lenses must be cleaned, use a microfiber cloth
and glasses cleaning solution.
Make sure that the locking cable connectors are fully tightened when the product is installed.
Check the voltage of the power line before connecting the fixture to ensure that it is within the
required range for the fixture.
In the event of a serious operating problem, cut power to the fixture and cease operation
immediately.
For technical support, please contact
426-8661).
Assembly:
or call 1-855-GANTOM1 (1-855-